Energy Saver: This is a micro-controller based system used for switching Air-conditioners. It helps to control electricity bill without compromising on the comfort. It has a feature to run an internal/external fan even when the compressor is in 'Off' mode. This feature helps in cooling of the compressor thus increasing the life of the AC. Energy saving up to 33%.   Cadis:  An energy management product in 'Office Automation' for monitoring and control of existing Office loads through a PC. This will enable the user to monitor and switch 'On/Off' various loads like AC,Lights,Fans,Security Systems etc.This can be done through a PC,or automatically as per programmed timings.    Computer Based Pre-paid Energy metering system: This an effective pre-paid energy metering system with computerised monitoring of transactions like energy purchases,meter tampering,consumption pattern,etc from time to time.The user friendly software enables accurate measurement of power consumed and facilities total accounting of transactions on a daily and monthly basis.    SEM Series: This is a private meter for individual user with PC connectivity. It can monitor kW & kWh and help create graphs & reports for consumption analysis. It also features TOD & Md (kW) measurement.    OPM Series: A three phase tri-vector meter, it can monitor all the active & reactive electrical parameters along with features of harmonic analysis and Md (kVA) prediction.    Integrated Power Meter (IPM): Economical solution for PC based monitoring if the number of points exceed 50, for measurement of all basic tri-vector parameters.    Power Factor Controller (PFC): Displays all major electrical parameters and also controls power factor to maintain it at the pre defined value. This improves the overall power factor of the plant thus increasing the life of the transformers and motors, while saving the users from 'Pf' penalty.    Maximum Demand Controller (MDC): Monitor all electrical parameters, computes actual demand and predicts future demand while at the same time it initialises required control action to shed off unwanted loads, thus keeping the maximum demand below the pre defined value. It helps in maintaining the consumption of various divisions below their allocated demand and saves user from 'Md' penalty.   Other energy saving products developed by CMS that you might find useful at your work place.